{"product_id":"carolina-tarps-tarp-motor-for-dump-truck-1-5hp-50-1-universal-12v-electric-tarp-system-motor","title":"12V Electric Tarp Motor for Dump Truck U312037","description":"\u003cbr\u003e50:1 Gear Ratio, 1.5 HP, 12V Direct Current, 40 Amps, Reversible Action, 44 NM Operating Torque. One of the FASTEST, Strongest Electric Tarp Motors Available.\u003cbr\u003eUNIVERSAL FIT for Dump Bodies up to 28 feet. Dump Truck Tarp Motor has a 3\/4 inch output shaft and a 5-bolt mounting pattern works with most Electric Tarp Systems.\u003cbr\u003eOutput shaft is 3\/4 inches thick and 3-3\/4 inches long with a 5\/16' hole drilled at 1 inch and at 2 inches for best fit.\u003cbr\u003eINCLUDES reflective chrome housing, all necessary mounting hardware, and 3-Year warranty\u003cbr\u003e3-YEAR WARRANTY: This electric tarp motor will deliver years of speed, strength, and reliability under normal use. Due to electric motor efficiency and electric power available from your vehicle's battery or alternator, these units are rated for intermittent use. Use for short periods of time only, allowing it to cool between uses. If your motor becomes too hot to touch, stop operation and allow it to cool. Recommended wire is 6 or 8 gauge.\u003cbr\u003e\u003cbr\u003e\u003cp\u003e Our tarp motor will have your electric tarp system back up and running in no time, due to the wide compatibility and universal bolt pattern. The 1.5 horsepower and 50:1 gear ratio make it one of the strongest, fastest motors. It is ideally suited for most dump beds up to 28 feet. \u003cbr\u003e \u003cbr\u003eSpecifications\u003cbr\u003eType: Direct Drive\u003cbr\u003eGear reduction: Worm to Wheel\u003cbr\u003eGear ratio: 50:1\u003cbr\u003eMounting: Three 5\/16 - 18 Grade 5 minimum bolts\u003cbr\u003eOutput Shaft: 3\/4' using 5\/16' through hole\u003cbr\u003eVoltage: 12V\u003cbr\u003eOperating torque: 44 NM\u003cbr\u003eCurrent Draw @ rated torque: 40 Amps\u003cbr\u003ePower: 1.5 hp\u003cbr\u003eBraking: Inherent\u003cbr\u003eDimensions: L:12', W:6.5', H:4'\u003cbr\u003eReversible action motor includes chrome housing and 3 year warranty. \u003cbr\u003e\u003cbr\u003e Mounting \u003cbr\u003e Slim Motors have three 5\/16'-18 x 1\/2' deep mounting holes on the output shaft side of the gearbox. All three mounting holes should be used when mounting the direct drive motor unit to the bulkhead (drilling new holes or welding the gearbox or other parts of the unit will void the motor's warranty).\u003cbr\u003eOpening, separating, or otherwise tampering with motor and gearbox will void warranty. \u003cbr\u003e Coupling \u003cbr\u003e The gearbox has a 3\/4' diameter output shaft with a 5\/16' diameter through hole. To minimize stress on your motor and gearbox, avoid the use of oscillating loads and attach tubes as straight as possible to the output shaft. \u003cbr\u003eElectrical Installation \u003cbr\u003e Complete a thorough check and installation of all wiring while all cables are unattached. Where necessary, securely fasten all wiring to adjacent structure using cable ties.\u003cbr\u003e\u003cbr\u003eDue to electric motor efficiency and electric power available from your vehicle's battery or alternator, these units are rated for intermittent use. Use for short periods of time only, allowing it to cool between uses. If your motor becomes too hot to touch, stop operation and allow it to cool. Recommended wire is 6 or 8 gauge. \u003c\/p\u003e\u003cbr\u003eTools \u0026amp; Home Improvement Hardware Tarps \u0026amp; Tie-Downs","brand":"My Store","offers":[{"title":"Default Title","offer_id":44012912869466,"sku":"P353529619900669185","price":31.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/4099\/4906\/files\/0faf4e90f40710ee1464dc855f22414836d15c50bd502bdf4f632a3a75f53867.jpg?v=1788588633","url":"https:\/\/rukobado.boats\/products\/carolina-tarps-tarp-motor-for-dump-truck-1-5hp-50-1-universal-12v-electric-tarp-system-motor","provider":"My Store","version":"1.0","type":"link"}